Welcome to the AECB Forums AECB Member’s Discussion Forum Member Discussion Tuesday 12th December 12.20pm

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #46475
    James Allen
    Keymaster

    Please let us know your suggested topics for discussion here. We look forward to welcoming you to the webinar! If you are an AECB member and have not received an invite to this discussion, please email emma@aecb.net for your invite.

    #46482
    Umendra Singh
    Participant

    Hi Emma,
    I would suggest, How to define a proposed cavity a ventilated, slightly ventilated or unventilated. How and when a low-e value can be use in U-value calculation? May be worth reading the report ‘Ventilation of the Cavities in Timber Framed Walls C H Sanders, Centre for Research on Indoor Climate and Health School of Engineering, Science and Design Glasgow Caledonian University’before the discussion.
    Thanks
    Umi

    #46499
    James Allen
    Keymaster

    A few more questions which have been put forward for the discussion are;
    1. Do members have any experience of, or know of design guidance on, decentralised MVHR?
    2. Decentralised MVHR in 2 storey buildings.
    3. Positive pressure ventilation systems (PIV) or MEV in retrofit or budget tight projects
    4. DPC details and moisture creep at bottom of solid wall when externally insulating.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.