Go to Forum Home › Building Design › Temperature and RH Sensors & Monitoring

Viewing 3 reply threads
  • Author
    Posts
    • 25 April 2012 at 11:57 am #31673
      Anonymous

        For our barn conversion I'd like to install temperature and RH sensors, together with monitoring equipment to evaluate how the building performs once completed.

        Does anyone have any advice/experience on equipment and/or suppliers?

      • 25 April 2012 at 9:30 pm #38557
        Anonymous

          Here's a system that could be used:

          http://moisture-monitor.com/index.php?page=monitors-loggers-alarms

          I expect there are others. There's also a lot of discussion about DIY 1-wire systems on the Green Building forum and the Navitron forum.

        • 26 April 2012 at 5:03 pm #38558
          Anonymous

            Thanks for your advice, I'll have a look on the other forums.

          • 7 January 2013 at 10:25 am #38559
            Anonymous

              Thanks for that Dave, it's a self build so slow and steady progress!

              Is the USB itself a sensor or can it be connected to a probe within the wall/roof/floor?

          • Author
            Posts
          Viewing 3 reply threads
          • You must be logged in to reply to this topic.